LAUNCH X431: Ford Bronco Module Initialization
The LAUNCH X431 diagnostic tool can perform initialization on Ford Bronco after replacing some parts, so that the new parts can match properly. This article will introduce how to perform the "Local Interconnect Network New Module Initialization" function.
Function description: Use this service function only after replacing any of the following components: rear view camera, intrusion sensor, rain sensor module, battery monitoring system (only when replacing it with one that has a different part number).
Supported Products: Launch PRO or PAD series comprehensive diagnostic equipment.
X431 PRO series:
X431 PROS V / X431 V+ / X431 PRO ELITE / Pros Elite / X431 V / PRO3 V+ Elite
X431 PRO3S+ / Pro3 ACE / Pro3 APEX / X431 PRO5
X431 PAD series products:
Tested model: Ford / 2024 / Bronco, VIN: LJXDJ3DB1RTP*****
Current equipment: LAUNCH X431 PAD V ELITE
Operation process:
1. Connect the vehicle to the X431 PAD V and start the diagnosis on the PAD V. Choose [Local Diagnose] -> [Ford] to test.
2. Choose [Automatically Search] to identify car models automatically.
3. Click [System Scan] to scan the entire vehicle systems.
4. Click [BCM (Body Control Module)] to access the system.
5 Click [Special Functions] -> [LIN (Local Interconnect Network) New Module Initialization].
6. Click OK. The LIN (Local Interconnect Network) new module initialization program is completed.
Comments
Post a Comment