LAUNCH X431: Ford Figo Brake Master Cylinder Pressure Sensor Calibration

When installing the brake master cylinder pressure transducer, you can recalibrate it using the LAUNCH diagnostic tool.

Supported equipment: LAUNCH full range of comprehensive diagnostic equipment

Current equipment: LAUNCH-X431 PAD V

Tested model: Ford/2021/Figo/KA, VIN: MAJFP1M10MA******

Operation process:

1. Connect PAD V to the vehicle, and then perform the following operations on PAD V: Choose [Local Diagnose] -> [Ford]

2. Choose [Automatically Search] to identify car models automatically. Then Set Ignition Switch To ON (Position II).

3. Click [Smart Detection] to scan the entire vehicle systems.

4. Click [ABS (Anti-Lock Brake System)] to access the system.

5. Click [Special Functions] -> [Brake Master Cylinder Pressure Transducer Calibration].

6. Click OK. The brake master cylinder pressure transducer calibration program is completed.

LAUNCH X431