LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

 The new LAUNCH X431 PAD V is equipped with Smartlink C, which has the function of diagnosing heavy trucks. For example, you can use LAUNCH X431 PAD V in Scania for Cylinder Deactivation Test. We’ll show you how to do this next.

Note: X431 PAD V + Smartlink C can support 85+ HD brands, suitable for heavy-duty (Class 4 to 8) and medium-duty trucks (such as heavy trucks, city buses, bulldozers, excavators, etc.). Just purchase the HD software, no HD module is required.

First, Device Connection Vehicle OBD Diagnostic Port.


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

The following steps are performed on the X431 PAD V device: Open X-431 HD APP.


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Click on [Local Diagnostis], in the "Manufacturer" column select [Scania].


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Confirm the software version (V15.70), and click [OK].


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Select [CAN Automatic Identification].


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Click on [System Scan] for a full vehicle checkup.


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

X431 PAD V will diagnose the vehicle, and the [System List] column will display more detailed information.


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Click on [Enter], and clink on [OK].


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test
LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Enter the options in order, path: Special Function -> Check (Function Test) -> Cylinder Deactivation.


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test
LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test
LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

Vehicle status: Not activated -> activated.

In this interface, you can operate the cylinder, for example: Select [Cylinder 1], Click on [Close Cylinder], and click on [Open Cylinder].


LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test
LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test
LAUNCH X431 PAD V on Scania for Cylinder Deactivation Test

www.x431shop.eu

Comments

Popular posts from this blog

THINKCAR ThinkDiag unable to connect via Bluetooth?

How To Update LAUNCH X431 GIII X-PROG 3 Software?

Solved! LAUNCH X431 PAD 7 Firmware Update Failed