Launch X431 Pro5/X431 V+ Device is Corrupted Solution

 Here is the working solution to Launch X431 Pro5 (or Launch X431 V+) device is corrupted problem.

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

Follow the instructions below to reflash your x431 Lenovo Android tablet.

Free Download Launch X431 V+/Pro5 605FC patch to reset firmware

Two steps:
1. Use Qfil to flash into the special aboot.img
2. Use Qfil to reflash back to the default setting

I: Use Qfil to flash into the special aboot.img

1. Prepare the special aboot.img: download the emmc_appsboot_printlog_and_repair.mbn above

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

2. Prepare X431 Android tablet, i.e WIFI PRC TB-X605FC_S000078_200119_PRC

3. Open Qfil, load software TB-X605FC_S000078_200119_PRC

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

4.Turn off tablet. Press power key and plug in USB cable at the same time, machine will enter EDL, Qfil will recognize port 9008

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

5. Press Tools tab-> Partition Manager, then press OK

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

6. In the partition list, find a line which Label is aboot

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

7. Right-click the selected aboot line, and then select Manage Partition Data in the pop-up box

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

8. Load Image

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

9. Upload aboot image emmc_appsboot_printlog_and_repair.mbn downloaded above

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

10. Reflashing device in process. Click Close->Close->OK, the tablet with restart.

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

II. Use Qfil to reflash back to the default setting

Turn off Launch X431 machine, press and hold the volume up button and plug in the usb cable at the same time.
Make the machine enter 9008 mode again.
Use Qfil to reflash into the default setting.

Launch X431 Pro5, X431 V+ Device is Corrupted Solution

NOTE:

The above fixes for RPBM partition data errors have been completed.
If the machine fails to start after the first step of reflashing into the special aboot operation, then it may not be the same problem, please send the machine to your dealer for further analysis.

Comments

Popular posts from this blog

THINKCAR ThinkDiag unable to connect via Bluetooth?

How To Update LAUNCH X431 GIII X-PROG 3 Software?

Solved! LAUNCH X431 PAD 7 Firmware Update Failed